Automotive maintenance service engine transmission cooling system fluids filters
Filters: Inspect and replace Air Filter, Fuel Filter.
Brakes: Inspect Brake pads, and linings . Clean and adjust rear brakes.
Belts: Inspect belts and hoses.
Cooling System: drain and flush the cooling system and then replacing the old coolant with fresh coolant.
CV Boots: Inspect CV boots for cracks or tears.
Oil/Filter: Oil change filter and lube. Lubrication of the wheel bearings where applicable.
Parking brake: inspect to make sure the parking brake holds when it needs to and releases properly when it´s supposed to.
Power steering fluid Service: draining or flushing out your car´s old power-steering fluid and then adding fresh power steering fluid.
Ignition System: Remove and replace spark plugs ( where needed). Scope test and Inspect ignition system components.
Front End: Inspect ball joints, inner and outer tie rod ends, rack and pinion, control arms, power-steering pump, stabilizer links and wheels.
Suspension System: Inspect entire suspension system--springs, shock absorbers, struts, bushings and linkages.
Tires: check the tire pressure and rotate tires.
Automatic Transmission Service: Changing automatic transmission fluid with a transmission flusher, Motorvac Transtech II, which replaces the fluid more thoroughly than you could achieve with gravity alone.